Autodesk Moldflow Adviser 2019.0.5 / Insight / Synergy 2019.0.2 x64

Autodesk produces a lot of software for different parts of the design operation. A large set of Autodesk Simulation series is provided for the simulation of steps of various processes,
Autodesk-Moldflow
2.0/5 Votes: 1
Author
Autodesk Inc
Version
2019.0.5
Updated
May 25, 2020
Requirements
Multi Requirements
Size
2.34 GB

Report this app

Images

Description

Autodesk produces a lot of software for different parts of the design operation. A large set of Autodesk Simulation series is provided for the simulation of steps of various processes, which includes complete and comprehensive software.

Autodesk Moldflow or Autodesk Simulation Moldflow is actually the same software as Moldflow. After being purchased by Autodesk, it is listed in the company’s simulation products and includes the three main softwares, Adviser, Insight and Synergy, which form the core of the Simulation series.

Until the 2014 version, the Autodesk Simulation Moldflow CAD Doctor software was one of the programs in this series, which in later versions has become an independent tool for the entire Simulation series.

The Moldflow Design software was introduced until 2015 with Autodesk Simulation DFM.

Features

  • Simulation of plastic injection molding operations
  • Determining the temperature and temperature distribution in a mold, during the plastic injection molding cycle
  • Predicting material reactions due to pressure, heat and…
  • Analysis of material properties to detect accurate mechanical performance
  • Create a state of contraction and simulation
  • Ability to import output of various types of CAD software
  • Existence of more than 9200 ready data plastic materials
  • Reduction of design time and consequently reduction of cost and environmental effects
  • Identifying the components and types of features of designed designs as well as the inputs entered from the above software such as wall thickness, material cost, recyclability and…
  • Full coordination and integration with CAD software such as PTC Creo, SolidWorks, Autodesk Inventor and…

Required system

Operating System

  • Windows 8 or 8.1 Standard, Pro or Enterprise; Windows 7 (SP1 or later) Professional, Enterprise or Ultimate
  • Insight (solvers) only: Windows® Server 2008 (SP2 or later); Windows® Server 2012

CPU

  • 2GHz CPU speed or faster
  • Number of Cores: Minimum Quad-cores recommended

RAM

  • 8GB RAM or higher
  • 4GB or higher virtual memory/swap space

Hard Disk Space

  • 12GB or higher free disk space (2GB MB free disk space for installation)

Graphic

  • 512MB DRAM or higher OpenGL-capable graphics card
  • 24bit color setting at 1,280 x 1,024 or higher screen resolution

Installation guide

2018 version

Read the Readme.txt file in the Crack folder. The crack network comes with it and is a user guide like 2017.

Network 2017 version

First, run the sfx executable file to extract the installation files in the folder. After starting the installation, click Install; On the License and Series page, in the License Type section, select Network, and on the right, select Single License Server. Use 127.0.0.1 or Computer Name for the Server Name or Name of the server section and enter the following serials for the Product Information section:

400-56153761

Also, in the Product Key section, enter the following serials and continue and complete the installation:

Moldflow Adviser Ultimate 2017: 572I1
CADdoctor for Autodesk Simulation 2017: 577I1
Moldflow Design (Simulation DFM) 2017: 837I1
Moldflow Insight Ultimate 2017: 575I1
Moldflow Synergy 2017: 579I1

Then copy the NLM folder to the desired drive. Run the ADESK.DAT file with Notepad and enter your computer name or Computer / Hostname instead of this_host.

Run the LMTOOLS Utility tool or lmtools.exe file and enter a name in the Config Services tab and in the Service Name field, for example Autodesk for the Path section in the lmgrd.exe file, import the lmgrd.exe file from the NLM folder path. do. For the Path to the license file section, enter the ADESK.DAT file that was edited in the previous step. In the Path to the debug log file section, you can also create and import an empty text file. Then enable the Use Services and Start Server at Power Up options and click Save Service.

On the Service / License File tab, enable the LMTOOLS ignore license file path environment variable. Finally, go to the Start / Stop / Reread tab and click on Start Server and then ReRead License File. In the Server Status and Server Diags tabs, there is the ability to check the status and troubleshoot the server license status. If you see an error message, ReStart Windows once.

Copy and paste the LICPATH.LIC file to all sub-addresses below:

C:ProgramDataAutodeskCLMLGS

C:ProgramDataAutodeskCLMLGS12I345_2017.0.0.Flicpath.lic

Finally, copy and paste the clmloader.dll and flexsign.dll files in the program installation location.

! The two software applications, Insight and Synergy, run in the same environment

Moldflow Design 2017 Software Guide:
Stand-Anlone version:
First, run the sfx executable file to extract the installation files in the folder. After starting the installation, click Install; In the License and Series type page, and in the License Type section, the default option, Stand-Anlone, should be selected. Use the following serials for the Product Information section:

066-66666666

666-69696969

667-98989898

400-45454545

Also enter 837H1 in the Product Key section , then continue and complete the installation. Disconnect your internet connection and run the program. After viewing the Autodesk Licensing window, click Activate, and in the next step, select Request an activation code using an offline method and continue running the program again. Run the Keygen file in the Crack folder with Run as administrator and click Patch. Then enter the serial number given in the Request Code field in the corresponding location in Keygen and click Generate. In the license window, select I have an activation code from Autodesk and Paste the code given in the Activation section by clicking Section 1 and click OK. If you receive an error message, click Patch again.

Network version:
First, run the sfx executable file to extract the installation files in the folder. After starting the installation, click Install; On the License and Series page, in the License Type section, select Network, and on the right, select Single License Server. Use 127.0.0.1 for the Server Name section and enter the following serials for the Product Information section:

066-66666666

666-69696969

667-98989898

400-45454545

Also enter 837H1 in the Product Key section , then continue and complete the installation. After installation, install the Autodesk Network License Manager tool by running the NLM x64.msi file in the Crack folder. Then copy and paste the adskflex.exe file into the default path below:

C:Program FilesAutodeskAutodesk Network License Manager

Also, copy, copy and replace the adlmint.dll file in the bin folder of all installed programs and tools; for example:

C:Program FilesAutodeskMoldflow Adviser 2016in

Run the License.dat file with Notepad and enter your computer's name instead, your computer name or computer / Hostname, and your MAC Address or Ethernet Address instead of 141414141414. (The above information is available with the LMTOOLS Utility tool and in the System Settings tab.)

Run the LMTOOLS Utility tool or the lmtools.exe file and enter a name in the Config Services tab and in the Service Name section, for example Autodesk for the Path to the lmgrd.exe file section, import the lmgrd.exe file from the path below. :

C:Program FilesAutodeskAutodesk Network License Managerlmgrd.exe

For the Path to the license file section, enter the License.dat file. In the Path to the debug log file section, you can also create and import an empty text file. Activate the Use Services and Start Server at Power Up options and click Save Service.

On the Service / License File tab, enable the LMTOOLS ignore license file path environment variable. Finally, go to the Start / Stop / Reread tab and click on Start Server and then ReRead License File. In the Server Status and Server Diags tabs, there is the ability to check the status and troubleshoot the server license status. Run the program and ReStart Windows once if the error message is displayed.

Leave a Reply

Your email address will not be published. Required fields are marked *

If you need password to extract compress file, please see here.